TB2902HQ Datasheet | Toshiba

TOSHIBA Bi-CMOS Digital Integrated Circuit Silicon Monolithic Maximum Power 41 W BTL × 4-ch Audio Power IC The TB2902HQ is 4ch audio amplifier for car audio application. This IC can generate high power, high quality sound output, POUT MAX = 41 W, using a pure plementary P-ch and N-ch DMOS output stage. The built-in self diagnosis function which is included can be controlled via I2C BUS. .. In addition, stand-by and mute function, and various Protection feature are included. Features - High power output : POUT MAX (1) = 41 W (typ.) (VCC = 14.4 V, f = 1 k Hz, JEITA max, RL = 4 Ω) : POUT MAX (2) = 37 W (typ.) (VCC = 13.7 V, f = 1 k Hz, JEITA max, RL = 4 Ω) : POUT MAX (3) = 70 W (typ.) (VCC = 14.4 V, f = 1 k Hz, JEITA max, RL = 2 Ω) : POUT (1) = 27 W (typ.) (VCC = 14.4 V, f = 1 k Hz, THD = 10%, RL = 4 Ω) : POUT (2) = 23 W (typ.) (VCC = 13.2 V, f = 1 k Hz, THD = 10%, RL = 4 Ω) : POUT (3) = 45 W (typ.) (VCC = 14.4 V, f = 1 k Hz, THD = 10%, RL = 2 Ω) Low distortion ratio: THD = 0.015% (typ.) (VCC = 13.2 V, f = 1 k Hz, POUT = 5 W, RL = 4 Ω) Low noise: VNO = 90 µVrms (typ.) (VCC = 13.2 V, Rg = 0 Ω, BW = 20 Hz to 20 k Hz, RL = 4 Ω) Built in stand by & muting function: controlled via I2C Bus (pin 16) Built in clipping detection (pin 4) Built in I2C Bus for stand-by, mute, voltage gain control, self diagnosis: Output short detection, offset detection, tweeter or speaker open detection (pin 22 and 25) Built-in various protection circuits (Note 1, Note 2) Thermal shut down, over-voltage, out to GND, out to VCC, out to out short circuit Operating supply voltage: VCC (opr) = 9 to 18 V (RL = 4 Ω) VCC (opr) = 9 to 16 V (RL = 2 Ω) Weight: 7.7 g (typ.) - - - - - - - Note 1: Install the product correctly. Otherwise, it may result in break down, damage and/or degradation to the product or equipment. Note 2: These protection functions are intended to avoid some output short circuits or other abnormal conditions temporarily. These protect functions do...